Interlogix TruVision DVR 40, User Manual

Page: 42 / 122

36 TruVision DVR 40 User Manual
To call up a PTZ shadow tour number
1. In PTZ mode, do one of the following:
Front panel Press the Tour button. Enter a preprogrammed three-digit preset number.
Shadow tour starts immediately.
Remote control Press the Tour button. Enter a preprogrammed three-digit preset number.
Shadow tour starts immediately.
Mouse Right-click the mouse and select the menu option
Tour
. Select one of the tour
numbers listed.
Note: The PTZ preset number is preprogrammed. See section “PTZ settings” on page 86 for
further information.
The TVR 40 will adjust to the settings of this shadow tour number.
2. If you want to use a different shadow tour PTZ number, repeat step 1 when in the PTZ mode.
The unit will re-adjust to that shadow tour number.
3. To exit PTZ mode press the Menu button on the front panel or the OK button on the IR
remote control, or right-click the mouse and select
Exit
. You will return to live mode and the
camera will stay in its current position.
To start/stop autopan
Note
: This function is only available when using the mouse.
1. In live mode right-click the mouse and select
PTZ control
to enter PTZ mode. Click the
Autopan icon to start the panning.
Note: If the PTZ is in autopan mode and you exit PTZ mode, PTZ will continue in autopan
mode. You must re-enter PTZ mode to stop the autopan.
2. To exit PTZ mode, right-click the mouse and select
Exit
. You will return to live mode and the
camera will stay in its current position.
Manually acknowledging an alarm
When an alarm is triggered, the alarm indicator on the front of the TVR 40 flashes red to alert
you to the alarm. The alarm can be manually acknowledged to silence it. However, the alarm will
still be active.
This option can only be done when the alarm output is set to
Acknowledge
. See “External alarm
output” on page 82 for further information.
All alarm acknowledgements are saved in the system log.
To manually acknowledge an alarm
1. When the alarm indicator on the front panel is flashing red, press the manual alarm button to
acknowledge the alarm. The red flashing light will return to green.
The LED of the alarm source (for example, camera or system status) will continue to display
red.