Interlogix TruVision DVR 40, User Manual

Page: 56 / 122

50 TruVision DVR 40 User Manual
The following procedures show how to change camera settings from the Camera menu. They
can be changed in any order.
All changes made to the Camera menu apply to the selected camera. The camera settings of
one camera can easily be copied to another camera.
Setting up the camera title
Each camera can be given a title, which must be unique. If you do not give a camera a title, it is
automatically pre-numbered.
To setup the camera title
1. In the Camera menu go to the
Camera
list box and press Enter or left-click the mouse.
Select the number of the camera you want to name.
2. Go to the
Title
edit box and press Enter or left-click the mouse to enter into edit mode.
3. Enter the camera title. Left-click the mouse to enter edit mode. An alphanumeric on-screen
display appears. Select the characters required. Default is a number. Click
Shift
to select the
type of required character (upper or lower case letters, or special characters.) The character
type is shown on the bottom of the screen.
Note
: This edit function can only be done using the mouse.
4. Left-click the mouse to exit edit mode.
5. When you have made all the changes required in the Camera menu, go to OK and press
Enter or left-click the mouse to save all changes and return to the main menu. Press the
Menu button to return to live mode.
Positioning the camera title
You can position the camera title anywhere on the screen.
To position the camera title on screen
1. In the Camera menu enable the
Title Position
check box (  ) if you want the camera title to
appear on-screen. When enabled, the Position setup button alongside it becomes active.
2. Go to the
Position
setup button and press Enter, or left-click the mouse, to enter into edit
mode. A grid appears on-screen with the camera title in the bottom right corner of the
screen.
3. Move the joystick up/down/left/right to move the camera title around the screen. When you
are satisfied with the position, press Enter again or left-click the mouse to confirm and return
to the Camera menu.
Instructions on how to position the camera title are also provided on-screen.