Interlogix NS3552-8P-2S-V2 User Manual Download Page 198

Page: 198 / 511

Chapter 4: Web configuration

196

NS3552-8P-2S-V2 User Manual

services that are available on a host or server, each with a list of hosts or servers

permitted or denied to use the service. ACLs can generally be configured to control

inbound traffic and, in this context, they are similar to firewalls.
ACE is an acronym for Access Control Entry. It describes access permission

associated with a particular ACE ID.
There are three ACE frame types (Ethernet Type, ARP, and IPv4) and two ACE actions

(permit and deny). The ACE also contains many detailed, different parameter options

that are available for individual applications.

ACL status

The Voice VLAN OUI Table page shows the ACL status by different ACL users. Each

row describes the ACE that is defined. A conflict occurs if a specific ACE is not applied

to the hardware due to hardware limitations. The maximum number of ACEs is 512 on

each switch.

The page includes the following fields:

Object

Description

User

Indicates the ACL user.

Ingress Port

Indicates the ingress port of the ACE. Values include:

All

: The ACE matches all ingress ports.

Port

: The ACE matches a specific ingress port.

Frame Type

Indicates the frame type of the ACE. Values are:

Any

: The ACE matches any frame type.

EType

: The ACE matches Ethernet Type frames. Note that an Ethernet

Type based ACE will not get matched by IP and ARP frames.

ARP

: The ACE matches ARP/RARP frames.

IPv4

: The ACE matches all IPv4 frames.

IPv4/ICMP

: The ACE matches IPv4 frames with ICMP protocol.

IPv4/UDP

: The ACE matches IPv4 frames with UDP protocol.

IPv4/TCP

: The ACE matches IPv4 frames with TCP protocol.

IPv4/Other

: The ACE matches IPv4 frames, which are not ICMP/UDP/TCP.

IPv6

: The ACE matches all IPv6 standard frames.

Action

Indicates the forwarding action of the ACE.

Permit

: Frames matching the ACE may be forwarded and learned.

Deny

: Frames matching the ACE are dropped.

Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is 1 to 16.

When

Disabled

is shown, the rate limiter operation is disabled.

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands