Interlogix NS3552-8P-2S-V2, User Manual

Page: 428 / 511

Chapter 6: Command line mode
426 NS3552-8P-2S-V2 User Manual
Get protection state.
Syntax:
EPS state [<inst>]
Parameters:
<inst>
: Instance number
Maintainence entity End Point Command
MEP Config
Description:
MEP instance configuration
'mep|mip' this entity is either a MEP or a MIP - end point or intermediate point
'ingress|egress' this entity is either a Ingress (down) or Egress (up) type of
MEP/MIP
'domport|domevc' the domain is either Port or EVC
'level' is the MEG level
'port' is the residence port
'flow' is the related flow instance number - Port number in Port domain - EVC
number in EVC domain
'vid' is used for TAGGED OAM in port domain
'itu|ieee' is the MEG ID format
'meg' is the MEG ID - max. 8 char in case of 'ieee' - 6 or 7 char in case of 'itu'
'mep' is the MEP ID.
Syntax:
MEP config [<inst>] [mep|mip] [ingress|egress] [<port>] [domport|domevc] [<level>]
[itu|ieee] [<meg>] [<mep>] [<vid>] [<flow>] [enable|disable]
Parameters:
<inst>
: Instance number
mep|mip
: Mode of the MEP instance
ingress|egress
: Direction of the MEP instance
<port>
: Port number.
domport|domevc
: Flow domain
<level>
: MEP level (0-7)
itu|ieee
: MEG format
ITU
: ICC format as defined in Y.1731 ANNEX A
IEEE
: String format Domain Name and Short Name as defined in 802.1ag
<meg>
: MEG ID (max. 8 chars)
<mep>
: This MEP id (0-0x1FFF)
<vid>
: C-TAG only applicable for Port MEP
<flow>
: Flow instance number (Port/EVC)
enable|disable
: enable/disable
MEP Peer MEP
Description:
MEP Peer MEP id configuration.
Syntax:
MEP peer MEP [<inst>] [<mep>] [<mac_addr>] [enable|disable]