Interlogix NS3552-8P-2S-V2 User Manual Download Page 80

Page: 80 / 511

Chapter 4: Web configuration

NS3552-8P-2S-V2 User Manual

Buttons

• Select the

Auto-refresh

check box to refresh the page automatically. Automatic

refresh occurs every three seconds.

• Click

Refresh

to refresh the page immediately.

Detailed statistics

The DHCP Detailed Statistics page provides statistics for DHCP snooping. Note that

the normal forward per-port TX statistics are not increased if the incoming DHCP

packet is done by a L3 forwarding mechanism. Clearing the statistics on a specific port

may not affect global statistics since it gathers a different layer overview.

The page includes the following fields:

Object

Description

RX and TX Discover

The number of discover (option 53 with value 1) packets received and

transmitted.

RX and TX Offer

The number of offer (option 53 with value 2) packets received and

transmitted.

RX and TX request

The number of request (option 53 with value 3) packets received and

transmitted.

RX and TX Decline

The number of decline (option 53 with value 4) packets received and

transmitted.

RX and TX ACK

The number of ACK (option 53 with value 5) packets received and

transmitted.

RX amd TX NAK

The number of NAK (option 53 with value 6) packets received and

transmitted.

RX and TX Release

The number of release (option 53 with value 7) packets received and

transmitted.

RX and TX Inform

The number of inform (option 53 with value 8) packets received and

transmitted.

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands