Interlogix NS3552-8P-2S-V2 User Manual Download Page 295

Page: 295 / 511

Chapter 4: Web configuration

NS3552-8P-2S-V2 User Manual

293

RMON statistics status

The RMON Statistics Status Overview page provides an overview of RMON Statistics

entries. Each page shows up to 99 entries from the Statistics table (default is 20 entries

per page). The range of entries per page can be typed into the

Start from Control

Index

and

entries per page

fields. When initially accessing the page, it shows the first

20 entries from the beginning of the Statistics table. The first entry shown will be the

one with the lowest ID found in the Statistics table

The page includes the following fields:

Object

Description

Indicates the index of statistics entry.

Data Source (ifIndex)

The port ID to be monitored.

Drop

The total number of events in which packets were dropped by the probe due

to lack of resources.

Octets

The total number of octets of data (including those in bad packets) received

on the network.

Pkts

The total number of packets (including bad packets, broadcast packets, and

multicast packets) received.

Broadcast

The total number of good packets received that were directed to the

broadcast address.

Multicast

The total number of good packets received that were directed to a multicast

address.

CRC Errors

The total number of packets received that had a length (excluding framing

bits, but including FCS octets) of between 64 and 1518 octets.

Undersize

The total number of packets received that were less than 64 octets.

Oversize

The total number of packets received that were longer than 1518 octets.

Frag.

The number of frames with a size less than 64 octets received with invalid

CRC.

Jabb.

The number of frames with a size larger than 64 octets received with invalid

CRC.

Coll.

The best estimate of the total number of collisions on this Ethernet segment.

64 Bytes

The total number of packets (including bad packets) received that were 64

octets in length.

65~127

The total number of packets (including bad packets) received that were

between 65 to 127 octets in length.

128~255

The total number of packets (including bad packets) received that were

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands