Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual
163
The page includes the following fields:
Object
Description
Delete
Select this check box to delete the entry. The designated entry will be
deleted during the next save.
VLAN ID
The VLAN ID of the entry.
IGMP Snooping
Enable
Enable the per-VLAN MLD snooping. Only up to 32 VLANs can be selected.
Querier Election
Enable the MLD querier election in the VLAN. Disable to act as an IGMP
non-querier.
Compatibility
Compatibility is maintained by hosts and routers taking appropriate actions
depending on the versions of IGMP operating on hosts and routers within a
network. Selections include:
MLD-Auto
(default selection),
Forced MLDv1
,
and
Forced MLDv2
.
PRI
Priority of Interface. It indicates the MLD control frame priority level
generated by the system. These values can be used to prioritize different
classes of traffic.
The allowed range is
0
(best effort) to
7
(highest). The default interface
priority value is
0
RV
Robustness Variable. The RV permits tuning for the expected packet loss on
a network. The allowed range is
1
to
255
. The default robustness variable
value is
2
.
QI
Query Interval. The QI is the interval between general queries sent by the
querier. The allowed range is
1
to
31744
seconds. The default query interval
is 125 seconds.
QRI
Query Response Interval. This is the maximum response time used to
calculate the maximum resp code inserted into the periodic general queries.
The allowed range is
0
to
31744
in tenths of seconds. The default query
response interval is 100 in tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval. The Last Listener Query Interval is the
Maximum Response Delay used to calculate the Maximum Response Code
inserted into Multicast Address Specific Queries sent in response to Version
1 Multicast Listener Done messages. It is also the Maximum Response
Delay used to calculate the Maximum Response Code inserted into Multicast
Address and Source Specific Query messages.
The allowed range is
0
to
31744
in tenths of seconds, default last listener
query interval is 10 in tenths of seconds (1 second).
URI
Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is
0
to
31744
seconds, default unsolicited report interval
is 1 second.
Buttons
• Click
Refresh
to refresh the table starting from the
Start from VLAN
and
entries
per page
input fields.
• Click
I<<
to update the table starting from the first entry in the VLAN table (i.e., the
entry with the lowest VLAN ID).
Summary of Contents for NS3552-8P-2S-V2
