Interlogix NS3552-8P-2S-V2 User Manual Download Page 58

Page: 58 / 511

Chapter 4: Web configuration

NS3552-8P-2S-V2 User Manual

Client statistics:

Object

Description

Transmit to Client

The number of packets relayed from server to client.

Transmit Error

The number of packets erroneously sent to servers.

Receive from Client

The number of packets received from the server.

Receive Agent Option

The number of packets received with the relay agent information

option.

Replace Agent Option

The number of packets received is replaced with the relay agent

information option.

Keep Agent Option

The number of packets received is kept with the relay agent

information option.

Drop Agent Option

The number of packets received is dropped with the relay agent

information option.

Buttons

• Select the

Auto-refresh

check box to refresh the page automatically. Automatic

refresh occurs every three seconds.

• Click

Refresh

to immediately refresh the page.

• Click

Clear

to clear all statistics.

CPU load

This page displays the CPU load using an SVG graph. The load is measured as

average over the last 100 ms, 1 second, and 10 second intervals. The last 120 samples

are graphed, and the last numbers are displayed as text as well. To display the SVG

graph, the browser must support the SVG format. Consult the SVG Wiki for more

information on browser support as a plugin may be required.

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands