Interlogix NS3552-8P-2S-V2 User Manual Download Page 61

Page: 61 / 511

Chapter 4: Web configuration

NS3552-8P-2S-V2 User Manual

• Click

to update the system log entries, ending at the last entry currently

displayed.

• Click

to update the system log entries, starting from the last entry currently

displayed.

• Click

>>I

to update the system log entries, ending at the last available entry ID.

• Click

Print

to print the system log entry to the current entry ID.

Remote syslog

The System Log Configuration page displays the industrial managed switch remote

system log information details.

The page includes the following fields:

Object

Description

Mode

Indicates the server mode operation. When the mode operation is

enabled, the syslog message is sent to the syslog server. The syslog

protocol is based on UDP communication and received on UDP port

514. The syslog server will not send acknowledgments back to

sender since UDP is a connectionless protocol and it does not

provide acknowledgments. The syslog packet is always sent out even

if the syslog server does not exist. Selections include:

Enabled

: Enable remote syslog mode operation.

Disabled

: Disable remote syslog mode operation.

Syslog Server IP

Indicates the IPv4 host address of syslog server. If the switch

provides the DNS feature, it also can be a host name.

Syslog Level

Indicates what kind of message is sent to the syslog server.

Selections include:

Info

: Send information, warnings, and errors.

Warning

: Send warnings and errors.

Error

: Send errors.

Buttons

• Click

Save

to apply changes.

• Click

Reset

to undo any changes made locally and revert to previously saved

values.

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands