Interlogix NS3552-8P-2S-V2 User Manual Download Page 188

Page: 188 / 511

Chapter 4: Web configuration

186

NS3552-8P-2S-V2 User Manual

The page includes the following fields:

Object

Description

QoS Class

Available QoS Class values range from 0 to 7. QoS Class (0-7) can be

mapped to followed parameters.

DPL

Actual Drop Precedence Level.

DSCP

Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding

QoS Class and DPL value

Buttons

• Click

Save

to save changes.

• Click

Reset

to undo any changes made locally and revert to previously saved

values.

QoS control list

The QoS Control List Configuration page shows the QoS Control List (QCL), which is

made up of the QCEs. Each row describes a QCE that is defined. The maximum

number of QCEs is 256 on each switch. Click on the lowest plus sign to add a new

QCE to the list.

The page includes the following fields:

Object

Description

QCE#

Indicates the index of QCE.

Port

Indicates the list of ports configured with the QCE.

DMAC

Specify the type of Destination MAC addresses for incoming frames.

Selections include:

Any

: All types of Destination MAC addresses are allowed. Default value.

Unicast

: Only Unicast MAC addresses are allowed.

Multicast

: Only Multicast MAC addresses are allowed.

Broadcast

: Only Broadcast MAC addresses are allowed.

SMAC

Displays the OUI field of Source MAC address (i.e., the first three octets (in

bytes) of the MAC address).

Tag Type

Indicates tag type. Selections include:

Any

: Match tagged and untagged frames. Default value.

Untagged

: Match untagged frames.

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands