Interlogix NS3552-8P-2S-V2 User Manual Download Page 116

Page: 116 / 511

Chapter 4: Web configuration

114

NS3552-8P-2S-V2 User Manual

The page includes the following fields:

Object

Description

Port

This is the logical port number for this row.

PVID

Allows to assign PVID to selected port. The range for the PVID is 1-

4094.
The PVID will be inserted into all untagged frames entering the

ingress port. The PVID must be the same as the VLAN ID in that the

port belongs to VLAN group, or the untagged traffic will be dropped.

Untag VID

Allows user to set the port to remove default VID. This option could be

edited when the Link Type is selected as Tagged.

Ingress Filtering

Enable ingress filtering for a port byselecting this check box. This

parameter affects VLAN ingress processing. If ingress filtering is

enabled and the ingress port is not a member of the classified VLAN

of the frame, the frame is discarded. By default, ingress filtering is

disabled (no checkmark).

Accept Frame Type

Determines whether the port accepts all frames or only tagged

frames. This parameter affects VLAN ingress processing. If the port

only accepts tagged frames, untagged frames received on the port

are discarded. By default, the field is set to

All

Link Type

Allow 802.1Q Untagged or Tagged VLAN for selected port.
When adding a VLAN to selected port, it tells the switch whether to

keep or remove the tag from a frame on egress.

Untag

: outgoing frames without VLAN-Tagged.

Tagged

: outgoing frames with VLAN-Tagged.

Q-in-Q Mode

Sets the industrial managed switch to QinQ mode, and allows the

QinQ tunnel port to be configured. The default is for the industrial

managed switch to function in

Disable

mode.

Disable

: The port operates in its normal VLAN mode. (This is the

default.)

MAN Port

: Configures IEEE 802.1Q tunneling (QinQ) for an uplink

port to another device within the service provider network.

Customer Port

: Configures IEEE 802.1Q tunneling (QinQ) for a client

access port to segregate and preserve customer VLAN IDs for traffic

crossing the service provider network.

Set Out layer VLAN
tag ether type

The Tag Protocol Identifier (TPID) specifies the ether type of incoming

packets on a tunnel access port.

802.1Q Tag

: 8100

vMAN Tag

: 88A8

Default

: 802.1Q Tag

Note:

The port must be a member of the same VLAN as the Port VLAN ID.

Buttons

• Click

Save

to save changes.

• Click

Reset

to undo any changes made locally and revert to previously saved

values.

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands