Interlogix NS3552-8P-2S-V2, User Manual

Page: 419 / 511

Chapter 6: Command line mode
NS3552-8P-2S-V2 User Manual 417
<policy_list>
: List of policies to delete
LLDP MED Coordinates
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [latitude|longitude|altitude]
[north|south|west|east|meters|floor] [coordinate_value]
Parameters:
latitude
:
Latitude, 0 to 90 degress with max. 4 digits (Positive numbers are
north of the equator and negative numbers are south of the equator).
longitude
: Longitude,0 to 180 degress with max. 4 digits (Positive values are
East of the prime meridian and negative numbers are West of the
prime meridian.
altitude
: Altitude, Meters or floors with max. 4 digits.
(default: Show coordinate location configuration)
north|south|west|east|meters|floor:
North
: North (Valid for latitude)
South
: South (Valid for latitude)
West
: West (Valid for longitude)
East
: East (Valid for longitude)
Meters
: Meters (Valid for altitude)
Floor
: Floor (Valid for altitude)
lldpmed Coordinate value
coordinate_value
: lldpmed Coordinate value
LLDP MED Datum
Description:
Set or show LLDP-MED Coordinates map datum.
Syntax:
LLDPMED Datum [wgs84|nad83_navd88|nad83_mllw]
Parameters:
wgs84|nad83_navd88|nad83_mllw:
wgs84
: WGS84
nad83_navd88
: NAD83_NAVD88
nad83_mllw
: NAD83_MLLW
lldpmed Coordinate datum
LLDP MED Fast
Description:
Set or show LLDP-MED Fast Start Repeat Count.
Syntax:
LLDPMED Fast [<count>]
Parameters:
<count>
:
The number of times the fast start LLDPDU are being sent during the
activation of the fast start mechanism defined by LLDP-MED (1-10).