Interlogix NS3552-8P-2S-V2, User Manual

Page: 362 / 511

Chapter 6: Command line mode
360 NS3552-8P-2S-V2 User Manual
Security Switch SNMP Trap Destination
Description:
Set or Show the SNMP trap destination address.
Syntax:
Security Switch SNMP Trap Destination [<ip_addr_string>]
Parameters:
<ip_addr_string>
: IP host address (a.b.c.d) or a host name string
Example:
Set SNMP trap destination address for 192.168.0.20
NS3552-8P-2S-V2:/>
security switch snmp trap destination 192.168.0.20
Security Switch SNMP Trap IPv6 Destination
Description:
Set or Show the SNMP trap destination IPv6 address.
Syntax:
Security Switch SNMP Trap IPv6 Destination [<ipv6_addr>]
Parameters:
<ipv6_addr>
:
IPv6 address is in 128-bit records represented as eight fields of up to
four hexadecimal digits with a colon separating each field (:). For
example, four hexadecimal digits with a colon separating each field (:).
For example, fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-
bit groups of contiguous zeros; but it can only appear once. It also uses
a following legally IPv4 address. For example,'::192.1.2.34'.
Example:
Set SNMP trap IPv6 destination address for 2001::0001
NS3552-8P-2S-V2:/> security switch snmp trap ipv6 destination 2001::0001
Security Switch SNMP Trap Authentication Failure
Description:
Set or show the SNMP authentication failure trap mode.
Syntax:
Security Switch SNMP Trap Authentication Failure [enable|disable]
Parameters:
enable
: Enable SNMP trap authentication failure
disable
: Disable SNMP trap authentication failure
(default: Show SNMP trap authentication failure mode)
Default Setting:
enable
Example:
Disable SNMP trap authentication failure
NS3552-8P-2S-V2:/>
security switch snmp trap authentication failure
disable