Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual
103
The page includes the following fields:
Object
Description
Port
The switch port number.
LACP Enabled
Controls whether or not LACP is enabled on this switch port. LACP
will form an aggregation when two or more ports are connected to the
same partner.
Key
The Key value incurred by the port, range 1-65535. Selecting
Auto
(default setting) sets the key as appropriate by the physical link
speed: 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the
Specific
setting, a
user-defined value can be entered. Ports with the same key value
can participate in the same aggregation group, while ports with
different keys cannot.
Role
The Role shows the LACP activity status. The
Active
selection
transmits LACP packets each second, while the
Passive
setting
waits for a LACP packet from a partner (speak if spoken to).
Timeout
The Timeout controls the period between BPDU transmissions.
Fast
transmits LACP packets each second, while the
Slow
selection
provides a wait for 30 seconds before sending a LACP packet.
Partner Priority
The Priority controls the priority of the port. If the LACP partner wants
to form a larger group than is supported by this device, then this
parameter controls which ports will be active and which ports will be
in a backup role. Lower number means greater priority.
Buttons
• Click
Save
to save changes.
• Click
Reset
to undo any changes made locally and revert to previously saved
values.
Summary of Contents for NS3552-8P-2S-V2
