Interlogix NS3552-8P-2S-V2 User Manual Download Page 172

Page: 172 / 511

Chapter 4: Web configuration

170

NS3552-8P-2S-V2 User Manual

The page includes the following fields:

Object

Description

MVR Mode

Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in

IGMP/MLD snooping. We suggest enabling Unregistered Flooding control

when the MVR group table is full.

Delete

Select

Delete

to delete the entry. The designated entry will be deleted during

the next save.

MVR VID

Specify the Multicast VLAN ID.

Caution:

We do not recommend overlapping

MVR source ports with

management VLAN ports.

MVR Name

MVR Name is an optional attribute to indicate the name of the specific MVR

VLAN. The maximum length of the MVR VLAN Name string is 16

alphanumeric characters (it must contain at least one alpha character). The.

MVR VLAN name can be edited for the existing MVR VLAN entries or it can

be added to the new entries.

IGMP Address

Define the IPv4 address as source address used in IP header for IGMP

control frames. The default IGMP address is not set (0.0.0.0). When the

IGMP address is not set, the system uses the IPv4 management address of

the IP interface associated with this VLAN.
When the IPv4 management address is not set, the system uses the first

available IPv4 management address. Otherwise, the system uses a pre-

defined value. By default, this value is 192.0.2.1.

Mode

Specify the MVR mode of operation. In

Dynamic

mode (default setting),

MVR allows dynamic MVR membership reports on source ports. In

Compatible

mode, MVR membership reports are forbidden on source ports.

Tagging

Specify whether the traversed IGMP/MLD control frames will be sent as

Untagged

Tagged

(default setting) with the MVR VID.

Priority

Specify how the traversed IGMP/MLD control frames will be sent in a

prioritized manner. The default Priority is

LLQI

Define the maximun time to wait for IGMP/MLD report memberships on a

receiver port before removing the port from multicast group membership.

The value is in units of tenths of a seconds. The range is from

31744

The default LLQI is five-tenths or one-half second.

Interface Channel
Setting

When the MVR VLAN is created, click the Edit symbol to expand the

corresponding multicast channel settings for the specific MVR VLAN.

Summary about the Interface Channel Setting (of the MVR VLAN) will be

shown besides the Edit symbol.

Port

The logical port for the settings.

Port Role

Configure an MVR port of the designated MVR VLAN as one of the following

roles.

Inactive

: The designated port does not participate in MVR operations.

Source

: Configure uplink ports that receive and send multicast data as

source ports. Subscribers cannot be directly connected to source ports.

Receiver

: Configure a port as a receiver port if it is a subscriber port and

should only receive multicast data. It does not receive data unless it

becomes a member of the multicast group by issuing IGMP/MLD messages.

Caution:

We do not recommend overlapping

MVR source ports with

Summary of Contents for NS3552-8P-2S-V2
































































































































































































































































































































































































































































































































Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands

Interlogix NS3552-8P-2S-V2, User Manual

Search results

Summary of Contents for NS3552-8P-2S-V2

Reviews:

Related manuals for NS3552-8P-2S-V2

Brands by name

Popular brands