Interacoustics Virtual SVV, Instructions For Use Manual, Page: 46 / 436

Virtual SVV™ Instructions for Use - EN Page 42
Guidance and manufacturer’s declaration - electromagnetic emissions
Virtual SVV™ is intended for use in the electromagnetic environment specified below. The customer
or the user of Virtual SVV™ should assure that it is used in such an environment.
Emissions Test
Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11 Group 1 Virtual SVV™ uses RF energy only for its internal
function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11 Class B Virtual SVV™ is suitable for use in all commercial,
industrial, business, and residential environments.
Harmonic emissions
IEC 61000-3-2 Not Applicable
Voltage fluctuations /
flicker emissions
IEC 61000-3-3 Not applicable
Recommended separation distances between portable and mobile RF communications equipment
and Virtual SVV™.
Virtual SVV™ is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of Virtual SVV™ can help prevent electromagnetic interferences by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and
Virtual SVV™ as recommended below, according to the maximum output power of the communications
equipment.
Rated Maximum output
power of transmitter
[W] Separation distance according to frequency of transmitter
[m]
150 kHz to 80 MHz
d = 1.17
√𝑃𝑃
80 MHz to 800 MHz
d = 1.17
√𝑃𝑃
800 MHz to 2.5 GHz
d = 2.23
√𝑃𝑃
0.01 0.12 0.12 0.23
0.1 0.37 0.37 0.74
1 1.17 1.17 2.33
10 3.70 3.70 7.37
100 11.70 11.70 23.30
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note 1 At 80 MHz and 800 MHZ, the higher frequency range applies.
Note 2 These guidelines may not apply to all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.