90
Port Error Recovery
Control whether a port in the error-disabled state automatically will be enabled after a certain time. If
recovery is not enabled, ports have to be disabled and re-enabled for normal STP operation. The condition
is also cleared by a system reboot.
Port Error Recovery Timeout
The time to pass before a port in the error-disabled state can be enabled. Valid values are between 30 and
86400 seconds (24 hours).
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
4.7.2 Spanning Tree / MSTI Mapping
This page allows you to inspect the current STP MSTI bridge instance priority configurations, and possibly
change them, as well.
Configuration Identification
Configuration Name
The name identifying the VLAN to MSTI mapping. Bridges must share the name and revision (see below),
as well as the VLAN-to-MSTI mapping configuration in order to share spanning trees for MSTIs
(Intra-region). The name is at most 32 characters.
