104
Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of
MLD operating on hosts and routers within a network. Allowed selections are
MLD-Auto
,
Forced MLDv1
and
Forced MLDv2
.
The default compatibility value is MLD-Auto.
RV
Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a link. The
allowed range is
1
to
255
. The default robustness variable value is 2.
QI
Query Interval.
The Query Interval variable denotes the interval between General Queries sent by the
Querier. The allowed range is
1 to 31744
seconds. The default query interval is 125 seconds.
QRI
Query Response Interval.
The Maximum Response Delay used to calculate the Maximum Response
Code inserted into the periodic General Queries. The allowed range is
0
to
31744
in tenths of seconds.
The default query response interval is 100 in tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval.
The Last Listener Query Interval is the Maximum Response Delay used
to calculate the Maximum Response Code inserted into Multicast Address Specific Queries sent in
response to Version 1 Multicast Listener Done messages. It is also the Maximum Response Delay used
to calculate the Maximum Response Code inserted into Multicast Address and Source Specific Query
messages. The allowed range is
0
to
31744
in tenths of seconds. The default last listener query interval
is 10 in tenths of seconds (1 second).
URI
Unsolicited Report Interval.
The Unsolicited Report Interval is the time between repetitions of a node's
initial report of interest in a multicast address. The allowed range is
0
to
31744
seconds. The default
unsolicited report interval is 1 second.
Buttons
Refresh :
Refreshes the displayed table starting from the “VLAN” input fields.
<< :
Updates the table starting from the first entry in the VLAN Table; i.e., the entry with the lowest
VLAN ID.
>>:
Update the table, staring with the entry after the last entry currently displayed.
