14
Hardware
Installation
The switch is usually mounted in a 19” rack, which is usually installed in an IT room or other
secure place. The switch supports AC power input, PoE delivery and rackmount mounting.
Make sure all the power cables, Ethernet cables, screws and the air circulation are well
prepared and installed as directed below.
AC Power Input
Connect the attached power cord to the AC power input connector. The compatible AC
power input range is from 100 to 264 VAC.
Ethernet cable
Request
Wiring cable types:.
10 Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m)
PoE: To deliver power without problems, Cat 5e or Cat 6 cable is suggested, as high-quality
Ethernet cable reduces the loss of power during transmission.
SFP Installation
When installing an SFP transceiver, make sure the SFP type at each end is the same and
the transmission distance, wavelength and fiber cable can meet your demands. It is
recommended that the SFP transceiver be purchased with the switch to avoid any
incompatibility issues.
When connecting, plug the SFP fiber transceiver in first. The SFP transceiver has 2 plugs for
fiber cable: one is TX (transmit), the other is RX (receive). Cross-connect the transmit
channel at each end to the receive channel at the opposite end.
Rackmount Installation
Attach the brackets to the device by using the screws provided in the Rackmount Kit.
Mount the device in the 19
‟
rack by using four rackmounting screws provided by the rack
manufacturer.
