47
Buttons
Add new entry:
Click to add a new community entry.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
RMON
Alarm
Configuration
Configure the RMON Alarm table on this page. The entry index key is
ID
.
Delete
Check to delete the entry. It will be deleted during the next save.
ID
Indicates the index of the entry. The range is from 1 to 65535.
Interval
Indicates the interval in seconds for sampling and comparing the rising and falling threshold. The range is
from 1 to 65535.
Variable
Indicates the particular variable to be sampled. The possible variables:
InOctets:
The total number of octets received on the interface, including framing characters.
InUcastPkts
: The number of unicast packets delivered to a higher-layer protocol.
InNUcastPkts:
The number of broadcast and multicast packets delivered to a higher-layer protocol.
InDiscards:
The number of inbound packets that are discarded even when the packets are normal.
InErrors:
The number of inbound packets that contained errors preventing them from being deliverable to
a higher-layer protocol.
InUnknownProtos:
The number of the inbound packets that were discarded because of unknown or
unsupported protocols.
OutOctets:
The number of octets transmitted out of the interface, including framing characters.
OutUcastPkts:
The number of unicast packets that request to transmit.
OutNUcastPkts:
The number of broadcast and multicast packets that request to transmit.
OutDiscards:
The number of outbound packets that are discarded even when the packets are normal.
OutErrors:
The number of outbound packets that could not be transmitted because of errors.
OutQlen:
The length of the output packet queue (in packets).
