157
Syntax:
IP NTP Server Add <server_index> <ip_addr_string>
IP NTP Server Ipv6 Add <server_index> <server_ipv6>
IP NTP Server Delete <server_index>
Example:
poeswitch:/IP>ntp ser add 1 192.168.100.1
poeswitch:/IP>ntp ser add 2 168.95.1.1
Check the NTP Server settings by below command:
poeswitch:/IP>ntp conf
IP NTP Configuration:
=====================
NTP Mode : Enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.100.1
2 168.95.1.1
3
4
5
DNS Server
Syntax:
IP DNS [<ip_addr>]
Parameters:
<ip_addr>: IP address (a.b.c.d), default: Show IP address
Example:
poeswitch:/IP>dns 168.95.1.1
DNS Proxy
Syntax:
IP DNS_Proxy [enable|disable]
poeswitch:/IP>dns_proxy en
IPv6 Configuration
IPv6 Commands
Syntax:
IP IPv6 AUTOCONFIG [enable|disable]
IP IPv6 Setup [<ipv6_addr>] [<ipv6_prefix>] [<ipv6_router>]
IP IPv6 State <ipv6_addr> [enable|disable]
IP IPv6 Ping6 <ipv6_addr> [(Length <ping_length>)] [(Count
<ping_count>)] [(Interval <ping_interval>)]
Auto Configuration
Syntax:
IP IPv6 AUTOCONFIG [enable|disable]
Example:
poeswitch:/IP>ipv6 auto en
IPv6 Address Setting
(Address, Prefix,
Syntax:
IP IPv6 Setup [<ipv6_addr>] [<ipv6_prefix>] [<ipv6_router>]
