Intellinet 560931 User Manual Download Page 232

Page: 232 / 281

232

RMON History Overview

This page provides an overview of RMON history entries.

The displayed fields:

History Index

Indicates the index of History control entry.

Sample Index

Indicates the index of the data entry associated with the control entry.

Sample Start

The total number of events in which packets were dropped by the probe due to lack of resources.

Drops

The total number of events in which packets were dropped by the probe due to lack of resources.

Octets

The total number of octets of data (including those in bad packets) received on the network.

Pkts

The total number of packets (including bad packets, broadcast packets and multicast packets)

received.

Broadcast

The total number of good packets received that were directed to the broadcast address.

Multicast

Summary of Contents for 560931


























































































































































































































































































Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands

Intellinet 560931, User Manual

Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands