84
TCP/UDP
Port Number
The TCP/UDP port number can be used to calculate the destination port for the frame. Check to enable
the use of the TCP/UDP Port Number, or uncheck to disable. By default, TCP/UDP Port Number is
enabled.
Aggregation Group Configuration
Group ID
Indicates the group ID for the settings contained in the same row. Group ID "Normal" indicates there is no
aggregation. Only one group ID is valid per port.
Port Members
Each switch port is listed for each group ID. Select a radio button to include a port in an aggregation, or
clear the radio button to remove the port from the aggregation. By default, no ports belong to any
aggregation group. Only full duplex ports can join an aggregation and ports must be in the same speed in
each group.
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
4.5.2 LACP - Dynamic Aggregation
This page allows the user to inspect the current LACP port configurations, and possibly change them, as
well.
