189
Port>veriphy 24
Starting VeriPHY, please wait
Port Pair A Length Pair B Length Pair C Length Pair D Length
----- ------- ------- ------- ------- ------- ------- ------- ------
24 OK 0 OK 0 OK 0 OK 0
5.22 Maintenance Commands
Feature
Command Line
Maintenance Commands
Restart Device
Syntax:
System Reboot
Example:
System>reb
System will reboot in a few seconds
Factory Defaults
Syntax:
System Restore Default [keep_ip]
Example:
Software/Firmware
(Firmware Version,
Firmware Swapping,
Firmware Update)
Syntax:
Firmware Information
Firmware Swap
Firmware Load <ip_addr_string> <file_name>
Parameters of Firmware Load:
<ip_addr_string>: IP host address (a.b.c.d) or a host name
string
<file_name> : Firmware file name
Example:
Firmware Swapping
Firmware>sw
... Erase from 0x40fd0000-0x40fdffff: .
... Program from 0x87ff0000-0x88000000 to 0x40fd0000: .
... Program from 0x87ff000a-0x87ff000c to 0x40fd000a: .
Alternate image activated, now rebooting.
Firmware Update
Firmware>load 192.168.2.100 SMBStaX.dat
Downloaded "SMBStaX.dat"; 3415213 bytes
Master initiated software updating starting
Waiting for firmware update to complete
Starting flash update - do not power off device!
Erasing image...
Programming image...
Note 1:
The switch processes the firmware upgrading through the
TFTP protocol. When running firmware upgrading, open the
TFTP tool as the TFTP server for the switch.
For example: TFTPd32 is a freeware TFTP server you can
download from the Internet. Browse the directory of the
firmware file and select the correct server interface.
If you failed to upload the file, remember to shut down the
firewall of your computer. The process may be terminated by
your firewall.
