279
This page provides information about the active and alternate (backup) firmware images in the device,
and allows you to revert to the alternate image.
The Web page displays two tables with information about the active and alternate firmware images.
Note
:
1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In
this case, the Activate Alternate Image button is also disabled.
2. If the alternate image is active (due to a corruption of the primary image or by manual intervention),
uploading a new firmware image to the device will automatically use the primary image slot and
activate this.
3. The firmware version and date information may be empty for older firmware releases. This does not
constitute an error.
Image Information
Image
The flash index name of the firmware image. The name of primary (preferred) image is
image
;
the
alternate image is named
image.bk.
Version
The version of the firmware image.
Date
The date where the firmware was produced.
Buttons
Activate Alternate Image:
Click to use the alternate image. This button may be disabled depending
on system state.
Cancel:
Cancel activating the backup image. Navigates away from this page.
