175
(
Valid values are in the range 1 to 10 BPDUs per second.)
Advanced Setting
Syntax
:
STP bpduFilter [enable|disable]
STP bpduGuard [enable|disable]
STP recovery [<timeout>]
(
After
recovery timeout time is set, the recovery is enabled
automatically.)
MSTI Mapping
MSTI/VLAN Mapping
Syntax:
STP Msti Add <msti> <vid-range>
Example:
STP>mst add 1 100
Add VLAN 100 to MSTI1
STP>mst map
MSTI VLANs mapped to MSTI
---- --------------------
MSTI1 100
MSTI2 No VLANs mapped
MSTI3 No VLANs mapped
MSTI4 No VLANs mapped
MSTI5 No VLANs mapped
MSTI6 No VLANs mapped
MSTI7 No VLANs mapped
Port Setting
STP Port Mode
Syntax:
STP Port Mode [<port_list>] [enable|disable]
STP Port Edge [<port_list>] [enable|disable]
STP Port AutoEdge [<port_list>] [enable|disable]
STP Port P2P [<port_list>] [enable|disable|auto]
STP Port RestrictedRole [<port_list>] [enable|disable]
STP Port RestrictedTcn [<port_list>] [enable|disable]
STP Port bpduGuard [<port_list>] [enable|disable]
STP Port Statistics [<port_list>] [clear]
Example:
STP>port mode 1-24 dis (Disable STP on port 1-24)
STP>port edge 1-24 en (Enable Edge port on port 1-24)
STP>port autoedge 1-24 en (Enable Auto Edge on P1-24)
STP>port p2p 1-24 en (Enable P2P mode on P1-24)
STP>port p2p 1-24 auto (Enable Automatic P2P detection)
STP>port bpdu 1-24 en (Enable BPDUGuard on P1-24)
Port Path Cost
Syntax:
STP Msti Port Cost [<msti>] [<port_list>] [<path_cost>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all'. Port zero means aggregations.
<path_cost>: STP port path cost (1-200000000) or 'auto'
Example: Configure CIST 0 Port Path Cost
STP>msti port cost 0 all auto (Path cost = auto)
