Intellinet 560931 User Manual Download Page 196

Page: 196 / 281

196

6.1.2.2 Traffic Overview

This page provides an overview of general traffic statistics for all switch ports.

The displayed counters:

Port

The logical port for the settings contained in the same row.

Packets

The number of received and transmitted packets per port.

Bytes

The number of received and transmitted bytes per port.

Errors

The number of frames received in error and the number of incomplete transmissions per port.

Drops

The number of frames discarded due to ingress or egress congestion.

Filtered

The number of received frames filtered by the forwarding process.

Buttons

Refresh

: Click to refresh the page immediately.

Clear

: Clears the counters for all ports.

Auto

refresh

: Check this box to enable an automatic refresh of the page at regular intervals.

Summary of Contents for 560931


























































































































































































































































































Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands

Intellinet 560931, User Manual

Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands