38
SNMP Trap Configuration
Configure SNMP trap on this page.
Trap Mode
Indicates the SNMP trap mode operation. Possible modes:
Enabled:
Enable SNMP trap mode operation.
Disabled:
Disable SNMP trap mode operation.
Trap Version
Indicates the SNMP trap-supported version. Possible versions:
SNMPv1:
Set SNMP trap-supported version 1.
SNMPv2c:
Set SNMP trap-supported version 2c.
SNMPv3:
Set SNMP trap-supported version 3.
Trap Community
Indicates the community access string when sending an SNMP trap packet. The allowed string length is 0
to 255, and the allowed content is ASCII characters from 33 to 126.
Trap Destination Address
Indicates the SNMP trap destination address.
Trap Destination IPv6 Address
Provide the trap destination IPv6 address of this switch. The IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separating each field (:). For
example, “fe80::215:c5ff:fe03:4dc7: The symbol :: is a special syntax that can be used as a shorthand
way of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It can also
represent a legally valid IPv4 address. For example, “::192.1.2.34.”
Trap Authentication Failure
Indicates that the SNMP entity is permitted to generate authentication failure traps. Possible modes:
Enabled:
SNMP trap authentication failure.
Disabled:
Disable SNMP trap authentication failure.
Trap Link-up and Link-down
Indicates the SNMP trap link-up and link-down mode operation. Possible modes:
Enabled:
Enable SNMP trap link-up and link-down mode operation.
Disabled:
Disable SNMP trap link-up and link-down mode operation.
