Intellinet 560931 User Manual Download Page 218

Page: 218 / 281

218

Rx and Tx Decline

The number of decline (option 53 with value 4) packets received and transmitted.

Rx and Tx ACK

The number of ACK (option 53 with value 5) packets received and transmitted.

Rx and Tx NAK

The number of NAK (option 53 with value 6) packets received and transmitted.

Rx and Tx Release

The number of release (option 53 with value 7) packets received and transmitted.

Rx and Tx Inform

The number of inform (option 53 with value 8) packets received and transmitted.

Rx and Tx Lease Query

The number of lease query (option 53 with value 10) packets received and transmitted.

Rx and Tx Lease Unassigned

The number of lease unassigned (option 53 with value 11) packets received and transmitted.

Rx and Tx Lease Unknown

The number of lease unknown (option 53 with value 12) packets received and transmitted.

Rx and Tx Lease Active

The number of lease active (option 53 with value 13) packets received and transmitted.

Buttons

Auto-refresh:

Click this box to enable an automatic refresh of the page at regular intervals.

Refresh:

Click to refresh the page immediately.

Clear:

Clears the counters for the selected port.

Summary of Contents for 560931


























































































































































































































































































Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands

Intellinet 560931, User Manual

Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands