Intellinet 560931 User Manual Download Page 242

Page: 242 / 281

242

6.1.6.3 STP Port Statistics

This page displays the STP port statistics counters of bridge ports in the switch.

The STP port statistics counters:

Port

The switch port number of the logical STP port.

MSTP

The number of MSTP Configuration BPDUs received/transmitted on the port.

RSTP

The number of RSTP Configuration BPDUs received/transmitted on the port.

STP

The number of legacy STP Configuration BPDUs received/transmitted on the port.

TCN

The number of (legacy) Topology Change Notification BPDUs received/transmitted on the port.

Discarded Unknown

The number of unknown Spanning Tree BPDUs received (and discarded) on the port.

Discarded Illegal

The number of illegal Spanning Tree BPDUs received (and discarded) on the port.

Buttons

Refresh

: Click to refresh the page immediately.

Auto

refresh

: Check this box to enable an automatic refresh of the page at regular intervals.

Summary of Contents for 560931


























































































































































































































































































Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands

Intellinet 560931, User Manual

Search results

Summary of Contents for 560931

Reviews:

Brands by name

Popular brands