39
Trap Inform Mode
Indicates the SNMP trap inform mode operation. Possible modes:
Enabled:
Enable SNMP trap inform mode operation.
Disabled:
Disable SNMP trap inform mode operation.
Trap Inform Timeout (seconds)
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.
Trap Inform Retry Times
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255.
Trap Probe Security Engine ID
Indicates the SNMP trap probe security engine ID mode of operation. Possible values:
Enabled:
Enable SNMP trap probe security engine ID mode of operation.
Disabled:
Disable SNMP trap probe security engine ID mode of operation.
Trap Security Engine ID
Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for
authentication and privacy. A unique engine ID for these traps and informs is needed. When "Trap Probe
Security Engine ID" is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field
is used. The string must contain an even number (in hexadecimal format) with number of digits between
10 and 64, but all zeros and all Fs are not allowed.
Trap Security Name
Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and
privacy. A unique security name is needed when traps and informs are enabled.
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
SNMPv3
Community
Configuration
You can configure the SNMPv3 community table on this page:
The entry index key is Community.
Delete
Check to delete the entry. It will be deleted during the next save.
