Intel Xeon Phi Processor x200 Thermal/Mechanical Specification And Design Manual Download

Page: 107 / 114

Figure E-35. 1U Heatsink, Nut, M4, 1/2 (Reference Only)

2200 MISSION COLLEGE BLVD.

P.O. BOX 58119

SANTA CLARA, CA 95052-8119

0.2

0.05

8.3

0.2

5.5±0.05

5.07±0.1

5.85±0.05

5.2±0.05

1.57±0.1

R0.25

6.09

-0.5

4.24

-0.2

4.24

-0.2

(5 FULL THREADS

MINIMUM)

3.5

+0.5

-0.0

(

6.09) MAX

T30 DRIVER LEAD-IN

(5)

H94876

DWG. NO

SHT.

REV

SHEET 1 OF 2

DO NOT SCALE DRAWING

SCALE: 13

H94876

REV

DRAWING NUMBER

SIZE

SKT-P-KNL, HEATSINK NUT, M4

TITLE

DEPARTMENT

SEE NOTES

FINISH

MATERIAL

3/27/17

DATE

APPROVED BY

3/27/17

DATE

CHECKED BY

3/27/17

DATE

DRAWN BY

3/27/17

DATE

DIMENSIONS ARE IN MILLIMETERS

THIRD ANGLE PROJECTION

PARTS LIST

DESCRIPTION

PART NUMBER

ITEM NO

QTY

SKT-P-KNL, HEATSINK NUT, M4

H94876-003

TOP

REVISION HISTORY

ZONE

REV

DESCRIPTION

DATE

APPR

INITIAL RELEASE

8/28/15

1. ADDED RADIUS TO NUT.

2. CHANGED NOTE 7 FROM DIE/TAP PROCESS TO FULLY FORM THREADS.

3. REMOVED NOTE 5 - TBD, AND UPDATED NOTE 9 TO 8

4. CHANGED DASH NUMBER FROM H94876-001 TO H94876-002.

10/5/15

UPDATED NOTE 7 TO INCLUDE THE THREAD GRADE AND POSITION.

3/9/16

Ed1

. ADDED 6.09 AND 4.24 DIMENSIONS AND TOLERANCES FOR

T30 CLARIFICATION.

2. REMOVED 120° ANGLE DIMENSION.

3. ADDED SYMBOL

TO T30 DRIVER RELEATED DIMENSIONS.

4. CHANGED TOLERANCE FROM 8.3

0.12 TO 8.3

0.20.

5. CHANGED TOLERANCE FROM 4.24 +0/-0.34 TO 4.24 +0/-0.2.

6. CHANGED TOLERANCE FROM 3.5

0.05 TO 3.5 +0.5/-0.

7. MODIFIED NOTES: ADDITIONAL INFORMATION TO NOTE 1 AND 3.

8. NOTE 6 IS BOXED AND ADDED LEADER ARROWS W/

CALLED OUT IN

SECTION A-A.

9. ADDED NOTE 9.

8/16/16

1. ADDED NOTE 10 TO CALL-OUT FUMIO LUBRICANT APPLIED TO THE NUT.

10/20/16

PG2

ADDED SUPPLEMENTAL

DESIGN THAT IS AN ALTERNATIVE

3/27/17

NOTES; UNLESS OTHERWISE SPECIFIED:

1. REFERENCE DOCUMENTS

ASME Y14.5M-2009 - STANDARD DIMENSION AND TOLERANCES

UL1439 - UL SHARP EDGE TESTING

ISO 10664:2014 (E) THIRD EDITION 2014-10-01

2. FEATURES NOT SPECIFIED ON DRAWING SHALL BE CONTROLLED BY 3D CAD

DATABASE. FOR FEATURES NOT EXPLICITY TOLERANCED:

(BASIC DIMENSION FROM 3D CAD MODEL).

3. MATERIAL: SUS 316 ANNEALED

MINIMUM TENSILE YIELD STRENGTH: 240 MPa.

MINIMUM SURFACE HARDNESS EQUIVALENT TO BRINELL HARDNESS (HB)

OR VICKERS HARDNESS (HV) OF 149.

4. ALL DIMENSIONS ARE CRITICAL TO FUNCTION DIMENSIONS.

5. SHARP CORNERS MUST BE CHAMFERED, OR ROUNDED TO 0.25MM RADIUS MAX.

0.5MM THREAD MAXIMUM LEAD-IN.

FULLY FORM THREADS.TOLERANCE GRADE AND POSITION: 6H

CLEAN AND DEBURR ALL THREADS. MUST BE 100% FREE OF METAL DEBRIS.

T30 HEXALOBULAR INTERNAL DRIVING FEATURE FORMATION TO BE

CHECKED WITH GO GAUGE FROM ISO 10664 2014(E). NO-GO GAUGE

NOT REQUIRED DUE TO RELAXED TOELRANCES AND TOOL WEAR DIRECTION.

NUT TO BE FULLY SOAKED IN FUMIO FCN-5987 LUBRICANT PER FUMIO

APPLICATION INSTRUCTIONS.

6 POINT T30 DRIVER

FEATURE

2.1

.25

M4X0.7 INTERNAL THREAD

SECTION A-A

0.5MM MAXIMUM

LEAD-IN 6

Order Number: 334785-002

Intel

Xeon

Phi™ Processor x200 Product Family TMSDG

107



Retention Assembly Mechanical Drawings

Summary of Contents for Xeon Phi Processor x200



















































































































Search results

Summary of Contents for Xeon Phi Processor x200

Reviews:

Related manuals for Xeon Phi Processor x200

Brands by name

Popular brands

Intel Xeon Phi Processor x200, Thermal/Mechanical Specification And Design Manual

Search results

Summary of Contents for Xeon Phi Processor x200

Reviews:

Related manuals for Xeon Phi Processor x200

Brands by name

Popular brands