Intel SRCU32 - RAID Controller, User Manual

Page: 148 / 182

148 Intel RAID Controller SRCU32 User’s Guide
The Logical Drive Information Window
Double click on the logical drive icon. This window shows information on a logical drive. A
logical drive can be either a single disk, or a chaining group of disks (concatenation), or a stripe set
of several disks. See Figure 89.
Figure 89. Logical Drive Information Window
Drive No The number of the logical drive.
Drive Name The name of the logical drive.
Type The type of the logical drive. A logical drive can be either a single disk,
or a chaining group of disks (concatenation), or a stripe set of several
disks.
Status This is the state of the logical drive. It can be ready, missing (not
available after reset) or failed (for example, no longer available for the
controller).
Capacity The available capacity of array drives or host drives.
Attributes The attribute of a logical drive is usually read/write ([RW]). If a
component of a disk array is missing during startup and the operator
decides not to activate fail mode, the array is set to the read only attribute
([RO]). When the missing drive becomes available, the array drive
shows the ready status (for example, attribute [RW]).
Last Status The last status information of a logical drive. This is different from the
last status information of physical drives.