Intel SRCU32 - RAID Controller, User Manual

Page: 100 / 182

100 Intel RAID Controller SRCU32 User’s Guide
Advanced Setup
Configure Controller
Controller Settings
Use the Controller Settings dialog to change Intel RAID Controller SRCU32 parameters and
settings. All information concerning physical, logical, array and host drives are stored twice
(primary and secondary configuration data) on each hard drive. For example, the Intel RAID
Controller SRCU32 itself carries no configuration data of a specific disk array. For this reason the
migration of host drives between Intel RAID Controller SRCU32s is very easy and secure, even if
the SCSI IDs and channels are changed. Simply connect the hard drives to the new Intel RAID
Controller SRCU32, and the host drives will be automatically available. See Figure 39.
Figure 39. Controller Settings Dialog
Table 15. Controller Settings
Parameter Alternatives Description
On Intel RAID Controller SRCU32 cache (write and read cache) On Cache
Off Intel RAID Controller SRCU32 cache (write and read cache) Off
On Write cache On Delayed Write
Off Write cache Off
Enabled BIOS enabled
Disabled BIOS disabled, but <Ctrl> + <G> allowed
BIOS
Removed BIOS and <Ctrl> + <G> disabled
continued