INSYS WLAN serial 2.1
Functions
3.
Enter the following commands:
arp –s a.b.c.d 00:05:b6:xx:yy:zz
ping a.b.c.d
"a.b.c.d" is the desired IP address of the INSYS WLAN serial 2.1, e.g.
192.168.100.17
"00:05:b6:xx:yy:zz" is the MAC address of the INSYS WLAN serial 2.1.
You can find the MAC address of the INSYS WLAN serial 2.1 on the label on
the right side of the housing.
rst packet gets lost. The following ping packets will be replied prop-
erly.
m re-
ception level for the INSYS WLAN serial 2.1 is in the range of –40dBm to –60dBm.
Confi
WLAN" tab on the "State
of connection" button (Figure 8, page 46 position 6).
Configuration with AT commands
ut the connection state
, use
the command
AT#STAT
The fi
11.7
Retrieving the Connection State
You can retrieve the WLAN connection state of the INSYS WLAN serial 2.1. Then, the IN-
SYS WLAN serial 2.1 transmits the currently used WLAN radio channel, the level of the
received radio signal, the transmission rate, the signal-to-noise ratio, as well as the BSSID
of the access point or the MAC address of the ad-hoc remote terminal. The optimu
guration with HSComm
In order to
display the connection state
, click on the "
In order to
outp
55
Summary of Contents for WLAN 2.1
Page 1: ...Manual INSYS WLAN serial 2 1 Sep 10...
Page 2: ......
Page 93: ...INSYS WLAN serial 2 1 Declaration of Conformity 19 Declaration of Conformity 93...
Page 98: ......
