Functions
INSYS WLAN serial 2.1
11.14.1
Configuring the Remote Maintenance Password via HSComm
Changing or configuring the remote maintenance password
How to change the remote maintenance password:
You will need the HSComm WLAN software
The INSYS WLAN serial 2.1 is connected to the PC via the serial interface.
1.
Start the software HSComm WLAN.
2.
Change to the "Network" tab.
3.
Click on the configure button.
4.
Enter a user name.
5.
Enter a password.
You should note the password for later use.
6.
Click on OK .
7.
Check the checkmark at "change password/user name".
8.
Click on Send Default Settings .
A message window indicating "Values sent" is displayed.
rrect
password of the device to be configured must be entered before.
The password has been changed successfully.
The connection establishment of HSComm WLAN with the INSYS WLAN se-
rial 2.1 via Telnet takes place automatically, if "Telnet" is selected in the "In-
terface" menu. The IP address as well as the user name and the co
62
Summary of Contents for WLAN 2.1
Page 1: ...Manual INSYS WLAN serial 2 1 Sep 10...
Page 2: ......
Page 93: ...INSYS WLAN serial 2 1 Declaration of Conformity 19 Declaration of Conformity 93...
Page 98: ......
