Initial Operation
INSYS WLAN serial 2.1
3.
Enter the net mask 255.255.255.0:
AT#NM=255.255.255.0
4.
Restart the INSYS WLAN serial 2.1 using the command:
AT#RBT.
The INSYS WLAN serial 2.1 restarts. This will take approx. 5 seconds.
The device returns with the message "INSYS MICROELCTRONICS WLAN
" and is ready for operation.
The INSYS WLAN serial 2.1 can now be accessed in the network.
You can test the previously described configuration of a PC in the network
IP address
192.168.1.27.
8.1.26.
the LAN and has the IP address 192.168.1.25.
802.11b/g V2.x
Testing the configuration of the PC in the network
using these steps.
The INSYS WLAN serial 2.1 is connected to the WLAN and has the
The access point is ready for operation and has the IP address 192.16
Your PC is connected to
1.
Click in Windows on Start.
2.
3.
Enter
cmd
into the entry field and press the "Enter" key.
5.
he "Enter" key.
The INSYS WLAN serial 2.1 is commissioned successfully and can be
with different IP settings or the INSYS WLAN serial 2.1 can not be
accessed physically. Check the IP settings, WLAN settings as well as the indi-
Testing the configuration from the INSYS WLAN serial 2.1
Click on "Run".
The command prompt appears.
4.
Enter the following here:
ping 192.168.1.27
Confirm with t
You will receive the output "Pinging…" as well as "Reply from…".
reached in the WLAN.
If you get the output "Request Timed Out…", the device has probably been
configured
cation of the LEDs on the device.
You can test the previously described configuration from the INSYS WLAN
serial 2.1 via the terminal program.
36
Summary of Contents for WLAN 2.1
Page 1: ...Manual INSYS WLAN serial 2 1 Sep 10...
Page 2: ......
Page 93: ...INSYS WLAN serial 2 1 Declaration of Conformity 19 Declaration of Conformity 93...
Page 98: ......
