INSYS WLAN 2.1, Manual

Page: 65 / 98

INSYS WLAN serial 2.1 Functions
11.18 Creating and Displaying the Transmission Protocol
You can output the commented responses of possible failed transmitted settings using
the transmission protocol. If extended logging is enabled, you will see the commented
responses of all sent settings here.
Configuration with HSComm
In order to
create a transmission protocol
, check the checkbox "extended log-
ging" in the "Program Settings" menu (Figure 5, page 43, position 16).
In order to
display the transmission protocol , click in the HSComm menu line
on the "Sending protocol" entry (Figure 5, page 43 position 12).
Configuration with AT commands
This function can not be used using AT commands.
65