INSYS WLAN serial 2.1
Initial Operation
to the access point.
Co
eters of the INSYS WLAN serial 2.1
1.
Enter the IP address 192.168.1.27:
AT#IP=192.168.1.27
missioning scenario of this manual.
sk 255.255.255.0:
AT#NM=255.255.255.0
#RBT.
The INSYS WLAN serial 2.1 restarts. This will take approx. 5 seconds.
essage "INSYS MICROELCTRONICS WLAN
The INSYS WLAN serial 2.1 can now be accessed in the network.
Testing the configuration with a PC in the network
s
The access point is ready for operation and has the IP address 192.168.1.26.
dress 192.168.1.25.
1.
nfiguring the TCP/IP param
The terminal program is not yet started and connected to the INSYS WLAN
serial 2.1.
SSID, encryption and key are configured as previously described.
This IP address refers to the com
2.
Enter the net ma
3.
Restart the INSYS WLAN serial 2.1 using the command:
AT
The device returns with the m
802.11b/g V2.x" and is ready for operation.
You can test the previously described configuration of a PC in the network
using these steps.
The INSYS WLAN serial 2.1 is connected to the WLAN and has the IP addres
192.168.1.27.
Your PC is connected to the LAN and has the IP ad
Click in Windows on Start.
2.
Click on "Run".
3.
Enter
cmd
into the entry field and press the "Enter" key.
The command prompt appears.
4.
Enter the following command here:
ping 192.168.1.27
Confirm with the "Enter" key.
5.
eive the output "Pinging…" as well as "Reply from…".
You will rec
39
Summary of Contents for WLAN 2.1
Page 1: ...Manual INSYS WLAN serial 2 1 Sep 10...
Page 2: ......
Page 93: ...INSYS WLAN serial 2 1 Declaration of Conformity 19 Declaration of Conformity 93...
Page 98: ......