InfRec Thermo Gear G100, Operation Manual

Page: 73 / 141

Chapter 4 Advanced
◎
SCALE – TMP UNIT
This item is used to change the temperature unit (°C/°F).
(1) Select Scale on the menu screen, and then
select “TMP UNIT” and press CENTER.
(2) Select the temp unit to be used, and press
CENTER.
Notes
- The following eight kinds of temperature values are updated by switching between °C and °F:
(1) Upper temperature
limit value
(2) Lower temperature
limit value
(3) Temperature value of
the center point
(4) Maximum/minimum
temperature value
(5) Temperature value of
any given point
(6) Delta temp value (7) Unit of temperature
values
(8) Range display
◎
SCALE – TEMP SCALE
This item is used to change the temperature display range for thermal images.
On the SCALE setting screen, select SCALE UP LIMIT” or “SCALE LOW LIMIT” and press CENTER
of the joystick button to edit the value.
* Set “SCALE LOW LIMIT” likewise.
Pressing NEAR(Left) or FAR(Right) makes
a digit change; and pressing H Temp(Up)
or L Temp(Down) makes a number change.
Press CENTER to determine the value.
95691-2935-0000
4-13