InfRec Thermo Gear G100, Operation Manual

Page: 25 / 141

Preface
95691-2935-0000
No. Items Description
3 Date and time It displays date and time.
* Displayed clock type is changeable. → Page 1-4
4 Range
5 Upper temperature limit It displays the upper temperature limit of color bar.
* Upper temperature limit can be changed.
→
P.2-1, P.3-7, P.4-13
6 Lower temperature limit It displays the lower temperature limit of color bar.
* Lower temperature limit can be changed. → P.2-1, P.3-7, P.4-13
7 Color alarm
upper temperature limit It displays the upper temperature limit of color alarm.
8 Color alarm
lower temperature limit It displays the lower temperature limit of color alarm.
9 Color bar It displays color bar.
10 Unit of temperature value It displays temperature unit.
* Either Celsius or Fahrenheit can be selected.
→
P.4-13
11 Temperature value at BOX Indicates the maximum, minimum and average temperatures in specified box
area (up to five areas).
12 Temperature value at point
cursor Indicates a temperature of specified point (up to five points).
13 Center temperature value Indicates a temperature of center point.
14 Max/Min temperature value
Indicates a temperature of trace cursor.
M: Maximum temperature within a specified area
m: Minimum temperature within a specified area
15 Δ T temperature value
Indicates temperature difference between two specified points.
[Display example]
M-a: Maximum temperature(Max) – point a
a-m: Point a – minimum temperature (min)
X-a: Center point temperature – point a
16 Emissivity value
Indicates a preset emissivity value. * This can be changed. → P.3-11, P.4-30
17 Ambient temperature value
Indicates a temperature around the camera.
18 Alarm temperature value
Indicates a preset alarm temperature.
19 Zoom
Indicates ON/OFF of ZOOM.
20 Center-point cursor
Indicates a center point of the window.
21 Max/Min point cursor
Indicates the maximum/minimum temperature point within a specified area.
22 Point cursor
Used to specify arbitrary coordinates (up to five points).
23 File capacity
Indicates the number of files available for recording.
*This is not indicated when SD memory card is not used.
Notes
- Temperature value can be given to 1 decimal point.
- If the measurement value is over or under its limits, UNDER or OVER is indicated.
- If all setting is OFF, no icon is shown.
- Each icon display can be set as ON or OFF.
- Icon displays are updated at RUN mode only. When thermal data is replayed, its set values are also displayed.
18