![background image](http://html1.mh-extra.com/html/infrec/thermo-gear-g100/thermo-gear-g100_operation-manual_2058489036.webp)
Chapter2 Basic
◎
POWER ON/OFF
<Power ON>
Hold down the POWER button for two seconds.
The pilot lamp lights in green when the power is turned on.
<Power OFF>
Hold down the POWER button for two seconds.
The pilot lamp goes off when the power is turned off.
◎
THERMAL IMAGE MEASUREMENT
<Run/freeze>
- "Run" means the status during measurement. "Freeze" means the status when measurement is stopped.
The run state and the freeze state are switched by pressing REC/FRZ button.
Calibration (NUC) is executed at transitions from the freeze state to the run state regardless of execution
conditions.
* Refer to the page 4-37 for calibration (NUC).
<Temperature value setting>
The following three types are prepared for the temperature value setting.
(1) Short automatic setting
Sets the sensitivity and temperature level for the target automatically.
(2) Continuous
automatic setting
Updates the upper and lower limits of the temperature value for the target
continuously and automatically.
(3) Manual setting
Enables manual settings of the upper/lower limits and center of the
temperature values.
(
1)
Short automatic setting
Press AS button.
POWER button
*About pilot lamp
Power ON
Green light on
Power OFF
Light off
Sleep mode
Red light on
USB
mass storage
mode
Green light blinks
Alarm ON
Red light blinks
Laser ON
Orange light on
Pilot lamp
2.
BASIC
2-1
95691-2935-0000
Summary of Contents for Thermo Gear G100
