InfRec Thermo Gear G100, Operation Manual

Page: 111 / 141

Chapter 4 Advanced
◎
DATA – RENAME FOLDER
For renaming folder:
(2) Use H Temp(Up) and L Temp(Down) to
select a folder. Press FAR(Right) to go into
the folder. Press NEAR(Left) to get out of
it. Point cursor on ‘ . ’(dot) at top of the
folder list, then press CENTER to decide.
(1) Select “DATA” from menu and press
CENTER at “RENAME FOLDER”.
(2) Use NEAR(Left) and FAR(Right) to move
right and left. Use H Temp(Up) and
L Temp(Down) to change characters. Press
CENTER to decide.
95691-2935-0000
Notes
- If created name already exists in folder, an error message appears as “Same folder name exists” and the
folder is not created.
- Characters are displayed in orders of number, capital letter and symbol (space, hyphen and underscore).
- If a folder name was created by PC or other devices but is not displayed, it cannot be changed.
4-51