InfRec Thermo Gear G100 Operation Manual Download Page 55

Page: 55 / 141

Chapter3 Shortcut

This function is used to set the upper/lower limits and center temperature for the temperature scale.

Press

CENTER

Selecting item

Center temperature displayed
Selected item highlighted in orange

Setting

Selected item highlighted in blue
Editing digit highlighted in orange

Press

CENTER

Normal mode

Center temperature not displayed

(1) Selecting item

Select a setting item from the upper limit, lower limit and center temperature values

using H Temp(Up), L Temp(Down), NEAR(Left) or FAR(Right) of the joystick button.

Pressing CENTER of the joystick button enters the setting mode.

(2) Setting

Change the digit using NEAR(Left) or FAR(Right).

Edit the numerical value using H Temp(Up) or L Temp(Down).

Pressing CENTER will return to the item selection.

Notes

- Center temperature is displayed in the shortcut mode only. Upper/lower limit temperature is

displayed in all mode.

- When the temperature scale is changed, the continuous automatic setting will be cancelled.

3-8

95691-2935-0000

Summary of Contents for Thermo Gear G100














































































































































Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands

InfRec Thermo Gear G100, Operation Manual

Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands