InfRec Thermo Gear G100 Operation Manual Download Page 114

Page: 114 / 141

Chapter 4 Advanced

◎

CONNECTING TO PC

The USB interface is used to download images from this device to a PC.

[Connecting the main unit and a PC with a USB cable]

Open the rear cover and insert the USB cable into the USB Mini-B socket (indicated by the arrow).

*View with the rear cover opened

- Complied with USB 2.0.

- The LCD is turned off and the pilot lamp blinks in green.

Notes

- Connect the USB cable after turning on the power of this device.

- To remove the USB cable, execute "Safely remove hardware" on the taskbar of the PC, confirm the safety of

the removal, and then remove it.

- Insert the plug of the USB cable straight into the USB socket of the body. Likewise, remove it straight from

the USB socket.

- Do not hold the cable itself when removing it. Doing so may damage the socket or the cable.
- Do not format the memory built in this device on the PC.

- Do not write (operate or delete files, change file names, create or delete folders, or change folder names) to the

memory built in this device on the PC.

95691-2935-0000

4-54

Summary of Contents for Thermo Gear G100














































































































































Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands

InfRec Thermo Gear G100, Operation Manual

Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands