InfRec Thermo Gear G100, Operation Manual

Page: 53 / 141

Chapter3 Shortcut
<Shortcut – Delta temperature>
This function is used to set a reference point and compared point for the delta temperature function.
e : OFF e : OFF
d : OFF d : OFF
c : OFF c : OFF
b : OFF b : OFF
a : 12.3 a : 12.3 a : 12.3
X : 30.0 X : 30.0 Press
CENTER
X : 30.0
M : 78.7
Press
CENTER
M : 78.7 M : 78.7
M-X: 48.7 M-X: 48.7 M-X: 48.7
(1) Normal mode
Cursor: not displayed
Background: semitransparent (2) Selecting item
Cursor: orange
Background: gray (3) Setting
Cursor: blue
Background: gray
(1) Selecting item
Select the delta temperature display “m-X” using H Temp(Up), L Temp(Down),
NEAR(Left) or FAR(Right) of the joystick button.
Holding down CENTER of the joystick button switches between ON and OFF.
Pressing CENTER enters the setting mode.
Marks and descriptions
Mark Description
M Maximum temperature of trace cursor (upper case: M)
m Minimum temperature of trace cursor (lower case: m)
a Temperature at point cursor
X Center point temperature
(2) Setting
Select a setting item from “reference point” and “compared point” using NEAR(Left) or
FAR(Right).
Change the reference temperature using H Temp(Up) or L Temp(Down). The setting item changes
in the order of “maximum temperature”, “minimum temperature”, “point cursor” and “center point
temperature”.
Pressing CENTER will return to the item selection.
Notes
Max (maximum temperature) and min (minimum temperature) refer to the temperature in the
area specified in the trace cursor setting.
The display of a reference point specified for the reference/compared point is always ON (it cannot
be set to OFF).
3-6
95691-2935-0000