InfRec Thermo Gear G100 Operation Manual Download Page 58

Page: 58 / 141

Chapter3 Shortcut

This function is used to set the alarm to ON/OFF, and set a threshold value.

Normal mode

Press

CENTER

Selecting item

Selected item highlighted in orange

Setting

Selected item highlighted in blue

Press

CENTER

(1) Selecting item

Select the alarm temperature using H Temp(Up), L Temp(Down), NEAR(Left) or FAR(Right) of

the joystick button.

Hold down CENTER of the joystick button and change the setting (ON/OFF).

Pressing CENTER enters the setting mode.

If the alarm is set to OFF, change it to ON to enter the setting mode.

(2) Setting

Change the digit using NEAR(Left) or FAR(Right).

Edit the numerical value using H Temp(Up) or L Temp(Down).

Pressing CENTER will return to the item selection.

Notes

Setting items including alarm condition (over/under the set temperature), volume and image save
cannot be set with the shortcut. These items should be set from the menu screen.

3-11

95691-2935-0000

Summary of Contents for Thermo Gear G100














































































































































Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands

InfRec Thermo Gear G100, Operation Manual

Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands