InfRec Thermo Gear G100, Operation Manual

Page: 136 / 141

Chapter 7 Appendix
95691-2935-0000
do. Wire, oxidized 50 to 500 0.95 to 0.98
Nickel Commercially pure, polished 100 0.045
do. do. 200 to 400 0.07 to 0.09
do. Oxidized at 600 ° C 200 to 600 0.37 to 0.48
do. Wire 200 to 1000 0.1 to 0.2
do. Nickel oxide 500 to 650 0.52 to 0.59
do. do. 1000 to 1250 0.75 to 0.86
Platinum 1000 to 1500 0.14 to 0.18
do. Pure, polished 200 to 600 0.05 to 0.10
do. Ribbon 900 to 1100 0.12 to 0.17
do. Wire 50 to 200 0.06 to 0.07
do. do. 500 to 1000 0.10 to 0.16
Silver Pure, polished 200 to 600 0.02 to 0.03
Steel Alloy (8% Ni , 18% Cr ) 500 0.35
do. Galvanized 20 0.28
do. Oxidized 200 to 600 0.80
do. Oxidized strongly 50 0.88
do. do. 500 0.98
do. Rolled freshly 20 0.24
do. Rough plane surface 50 0.95 to 0.98
do. Rusty, red 20 0.69
do. Sheet, ground 950 to 1100 0.55 to 0.61
do. Sheet, nickel-plated 20 0.11
do. Sheet, polished 750 to 1050 0.52 to 0.56
do. Sheet, rolled 50 0.56
do. Stainless, rolled 700 0.45
do. Stainless, sandblasted 700 0.70
Cast iron Casting 50 0.81
do. Ingots 1000 0.95
do. Liquid 1300 0.28
do.
Oxidized at 600
°
C
200 to 600 0.64 to 0.78
do. Polished 200 0.21
Tin Burnished 20 to 50 0.04 to 0.06
Titanium
Oxidized at 540
°
C
200 0.40
do. do. 500 0.50
do. do. 1000 0.60
do. Polished 200 0.15
do. do. 500 0.20
do. do. 1000 0.36
Tungsten 200 0.05
do. 600 to 1000 0.1 to 0.16
do. Filament 3300 0.39
Zinc
Oxidized at 400
°
C
400 0.11
do. Oxidized surface 1000 to 1200 0.50 to 0.60
do. Polished 200 to 300 0.04 to 0.05
do. Sheet 50 0.20
8 - 1 1