InfRec Thermo Gear G100, Operation Manual

Page: 59 / 141

Chapter3 Shortcut
<Shortcut – Emissivity>
This function is used to set the emissivity.
Normal mode
Selecting item
Selected item highlighted in orange
Setting
Selected item highlighted in blue
Editing digit highlighted in orange
Press
CENTER
Press
CENTER
(1) Selecting item
Select the emissivity “E” using H Temp(Up), L Temp(Down), NEAR(Left) or FAR(Right) of the
joystick button.
Hold down CENTER of the joy stick button and change the setting (ON/OFF).
Pressing CENTER enters the setting mode.
If the emissivity is OFF, change it to ON to enter the setting mode.
(2) Setting
Change the digit using NEAR(Left) or FAR(Right).
Edit the numerical value using H Temp(Up) or L Temp(Down).
Pressing CENTER will return to the item selection.
Note
Emissivity setting with table reference is available from the menu screen.
Execute REF-CAL to measure a more accurate temperature before the emissivity setting.
(Refer to P.4-35)
3-12
95691-2935-0000