InfRec Thermo Gear G100 Operation Manual Download Page 62

Page: 62 / 141

Chapter 4 Advanced

◎

SAVE MODE – SINGLE IMAGE

This item is used to set the save (shooting) mode to the single image mode.

With the single image mode, a single image is saved into a folder of SD memory card.

See page 2-5 “Single Image Save” for details.

◎

SAVE MODE – INTERVAL

This item is used to set the save (shooting) mode to the interval mode.

With the interval mode, images are saved into a folder of SD memory card continuously at regular intervals.

95691-2935-0000

(1) Select “SAVE MODE” on the menu screen

and press CENTER of the joystick button.

(2) Select “SINGLE IMAGE” and then press

CENTER.

(1) Select “SAVE MODE” on the menu screen

and press CENTER of the joystick button.

(2) Select “INTERVAL” and then press

CENTER.

4-2

Summary of Contents for Thermo Gear G100














































































































































Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands

InfRec Thermo Gear G100, Operation Manual

Search results

Summary of Contents for Thermo Gear G100

Reviews:

Related manuals for Thermo Gear G100

Brands by name

Popular brands